Water treatment plant
The price includes the assembly.
Water Treatment Plant
How does it work?
The water treatment plant is a system intended to pump water into a water structure and control its quality. It is composed of, among other things:
other devices ensuring that the water is pure
It may be necessary to carry out the following actions when using a water structure:
Refilling water that was lost due to evaporation or splashing
Cleaning the filter
Adding preparations that ensure the water is in proper condition
Turning the pump on and off
These actions can be performed manually (e.g. once every few days) or automatically.
A fully automated treatment plant is recommended for larger installations.
Technical room - requirements and dimensions
The water treatment plant is installed in a technical room, near the water structure.
The technical room must be adequately prepared by the client before the installation can take place. It should be equipped with:
Water connection capable of filling the tanks in 8h.
Pipe connecting the technical room to the machine
Return pipe, connecting the machine to the technical room
An entrance allowing to place devices and water tanks inside
The technical room dimensions depend on the size of the whole installation and the degree of automation. 1 m3 is enough for smaller installations and those operated completely by hand. If the installation is larger, a room with floor area of more than 15 m2 may be necessary.
The technical room should be located possibly close to the operated machine and below the water through tank.
Ask us for technical documentation to check the exact dimensions of the technical room.
Water filter - it purifies the water before it gets to the machine. There are 3 types of filters:
Automatic filtering station - it provides automatic cleaning of filters controlled with a special controller
Semi-automatic filtering station - the filter is cleaned by moving a crank
Manual filtering station - each filter must be cleaned manually
Water tanks - they store enough water for the water structure to work The number of tanks needed for the water structure to operate properly depends on its size and the dimensions of the water through used in the project. In the case of using a large and capacious through, no tanks are required.
Automatic pH/redox dosing and measuring machine - a device for keeping PH and chlorine in water at an appropriate level
Automatic flocculant dosing machine - thanks to the flocculation phenomenon small impurities merge into larger ones. This process makes the water filtration more effective
Water softener - this device is active while adding fresh water to the tank. Recommended when water hardness on site is significant.
Automatic water refilling system - the system refills water lost due to splashing outside the through or evaporating
Wind protection - a wind speed measuring station used in outdoor installations. It turns the machine off when the wind splashes the water out of the through.
Installation requirements and conditions
Terms and conditions of sale
Please read the general terms and conditions that applies to all sales
30% of the order amount to confirm the order
50% of the order amount 2 weeks before the delivery
20% of the order amount 1 week after the assembly
-5% if ordered at least 50 days before the expected delivery date
-10%, if ordered at least 100 days before the expected delivery date
-15% if ordered at least 150 days before the expected delivery date
The digital water curtain is delivered Ex Works. It means that all transportation costs and travel expenses borne for the first installation and later servicing are covered by the client.
The client is responsible to cover the shipment, pay any local taxes and duties, and costs of any additional documentation (eg. ATA carnet) required by law or authorities at the destination.
If the installation is in Europe, we offer shipment as optional service.
Delivered products and services
Water treatment plant
2 - 10-day (depending on the size) assembly and testing done by 2 technicians
Optional products and services
Products and services that are offered at additional cost
Shipment to European countries
Extra assembly days (if the installation is delayed)
All the technical requirements must be fulfilled before the installation. It must be possible to run the pump and the tank must be filled with water during the installation. In that time, the machine and the ground below should be freely accessible to our technicians. They should have a possibility to run and test it for at least 6 hours per day.
The client should determine the work schedule in advance, and inform about all the safety requirements (like obligatory Personal Protective Equipment) and mandatory permits at the place of installation.
Our technicians may need help from the client to move heavy elements if they are a part of the installation.
Our insurance does not allow our technicians to perform activities other than work with the equipment we provide. In particular:
They may not assemble or disassemble the machine housing and its surroundings supplied by the client.
They may not perform any plumbing or electrical work
They cannot drill holes or use anchor bolts in order to fix the ceiling mounts
When the installation is complete, our technicians will provide information on how to operate and maintain the installation to a person designated by the client.
If the installation site requirements are not met, the installation may be postponed or prolonged until the client resolves all the problems. In this case, an extra assembly fee is charged for each additional assembly day.
The equipment is delivered with the manufacturer's warranty. We do not offer any additional guarantee for the delivered equipment.
Maintenance and servicing
All elements of the installation have to be maintained and serviced as specified by their manufacturers.